[2018 New] 100% Pass Newest Cisco CCNP Wireless 300-365 Dumps Exam Materials And Youtube Free Shared (Q1-Q30)

Get your Cisco CCNP Wireless 300-365 dumps exam preparation questions in form of 300-365 PDF from lead4pass. Newest Cisco CCNP Wireless 300-365 dumps vce youtube demo update free shared. “Deploying Cisco Wireless Enterprise Networks” is the name of Cisco CCNP Wireless https://www.lead4pass.com/300-365.html exam dumps which covers all the knowledge points of the real Cisco exam. Download Cisco CCNP Wireless real 300-365 dumps exam questions and verified answers. 100% passing guarantee and full refund in case of failure.

Google drive latest Cisco 300-365 dumps pdf materials: https://drive.google.com/open?id=1Vl3BcSbXnfokBm-tIiVaqcq7OR7m3ux-

Google drive latest Cisco 300-085 dumps pdf materials: https://drive.google.com/open?id=1KqBhub_phrkVa46jHQbdxUZR4DIwxB_h

Newest Cisco CCNP Wireless 300-365 Dumps Exam Questions And Answers (1-30)

Refer to Exhibit.
300-365 dumps
What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.)
B. 802.11a
C. 802.11e
E. 802.11r
Correct Answer: CD

A network engineer for a college dormitory notices that student devices are filling up the SP-DB and are not allowing the shared wireless printers to be discovered.
Which feature can be used to reserve space in the SP-DB for the printers?
C. Priority MAC
D. sso
Correct Answer: C

Refer to Exhibit.
300-365 dumps
300-365 dumps
A wireless client is connecting to FlexAPI which is currently working standalone mode. The AAA authentication process is returning the following AVPs:
Tunnel-Private-Group-ld(81): 15 Tunnel-Medium-Type(65):IEEE-802(6) Tunnel-Type(64): VLAN(13) Which three behaviors will the client experience? (Choose three.)
A. While the AP is in standalone mode the client will be placed in VLAN 15.
B. While the AP is in standalone mode the client will be placed in VLAN 10.
C. When the AP transitions to connected mode the client will be de-authenticated.
D. While the AP is in standalone mode the client will be placed in VLAN 13.
E. When the AP is in connected mode the client will be placed in VLAN 13.
F. When the AP transitions to connected mode the client will remain associated.
G. When the AP is in connected mode the client will be placed in VLAN 15.
H. When the AP is in connected mode the client will be placed in VLAN 10.
Correct Answer: ADE

Which two options are limitations of using an AP as a workgroup bridge? (Choose two.)
A. Only factory-configured MAPs can support WGB mode.
B. MAPs that are configured in WGB mode do not answer S36 radio measurement requests.
C. A limited subset of Layer 2 security types are supported for wireless clients of a WGB.
D. There is a limit of 20 wired client devices.
E. Multiple VLANs are not supported for wireless clients.
Correct Answer: BD

On which AP radio or radios is Cisco WGB association supported?
A. 2.4 GHz only
B. 2.4 or 5 GHz only
C. 2.4 5 or 4.9 GHz
D. 5 GHz only
Correct Answer: B

A customer requires that an SSID is broadcasted to specific access points that use certain interfaces. 300-365 dumps Which feature can be used to achieve this goal?
A. mobility groups
B. flex-connect roups
C. interface groups
D. APgroups
Correct Answer: C

Which of the following is not a Cisco RF fingerprinting key advantage over Location Tracking?
A. Uses existing LWAPP-enabled Cisco Unified Networking components.
B. Proprietary client hardware or software is required.
C. Better accuracy and precision.
D. Reduced calibration effort.
Correct Answer: B

A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?
A. Disable MCS data rates 0 through 11.
B. Disable MCS data rates used by 40 MHz channels.
C. Disable data rates that use CCK.
D. Disable VHT data rates.
Correct Answer: C

A corporation has a Cisco Unified Wireless Network that has been deployed for voice coverage. The wireless data rates have been tuned to mandatory rates of 18 Mbps and 36 Mbps. Some wireless clients have been experiencing drops streaming multicast video while moving throughout the building. What is the cause of the drop in video?
A. Clients are roaming at lower data rates and are not maintaining 36Mbps connectivity.
B. Clients are not roaming due to coverage. This is causing the multicast data to drop due to the client re-associating often.
C. Clients are connected at 18Mbps; however other clients are connecting at 12Mbps and are causing the multicast video to degrade.
D. Clients are maintaining a 12Mbps rate and cannot receive the stream at 18Mbps.
Correct Answer: A

An engineer used an interface group under the SSID configuration but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)
A. static VLAN on client
C. APgroup
D. static IP on client
E. MAC filtering
F. RFgroup
G. AAA override
Correct Answer: CG

A WLAN engineer has been asked to upgrade the software on a MSE 3365 Appliance. The engineer cannot access the system using the root password and the Grub password as the details had never been documented. How should the engineer perform the password recovery?
A. Use a console cable.
B. Contact Cisco TAC and arrange an RMA of the MSE.
C. Boot the MSE using the software installation DVD.
D. The Password can be reset using Prime Infrastructure.
Correct Answer: A

The customer has deployed C7960 phones with clients connected to them. What switch feature could be enabled to distinguish IP voice traffic from client data traffic?
A. VoiceVLAN
B. QoS routing
D. WeightedQueuing
Correct Answer: A

Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?
A. show ap config general Cisco_AP
B. show wlan wlan_id
C. show fexconnect summary
D. show fexconnect group detail
Correct Answer: B

A network engineer is experiencing issues enabling LAG on the WLC. Which four characteristics should be validated to ensure LAG configuration? 300-365 dumps (Choose four.)
A. All ports participate in the LAG by default when LAG is enabled on the controller
B. Dynamic interfaces and management are moved to port 1
C. Primary and secondary ports are needed for each interface.
D. Multiple untagged interfaces to the same port are not allowed.
E. EtherChannel must be configured for mode “on” on the switch.
F. Only one functional physical port is needed to continue to pass traffic.
G. Multiple LAGs are permitted on the controller.
H. The WLC does not need to be rebooted to enable the LAG configuration.
Correct Answer: ADEF

A network engineer is debugging issues with the mDNS gateway. Which type of reply should be seen in the Wireshark capture when querying for a mDNS servicein the Bonjour Cache?
A. unicast from Prime Infrastructure
B. unicast from controller
C. multicast from devices
D. multicast from controller
E. unicast from devices
F. multicast from Prime Infrastructure
Correct Answer: B

A customer requires that the remote site be able to utilize local servers when the AP is in WAN-down (standalone mode). Which AP mode must be configured on the wireless controller?
A. SE-Connect
B. Monitor
C. Local
D. FlexConnect
E. Sniffer
F. Rogue Detector
Correct Answer: D

What are two functions of the RAP in a mesh network? (Choose two.)
A. It provides a wired connection for the wireless mesh APs.
B. It adds capacity and resilience to a mesh area.
C. It creates a centralized management location for the mesh network.
D. It reduces the hop count to the wireless network that is connected to the edge.
E. It routes traffic from the wireless mesh to the wired network.
Correct Answer: BD

What address do PIM routers listen to in order to automatically discover the best RP for each multicast group?
D. 224.0.140
Correct Answer: D

A wireless engineer wants to enable optimized roaming for their 5GHz wireless network with these settings: -72dBm RSSI value 25% coverage exception level percentage and a minimum of 50 packets received.
Which two commands achieve these settings? (Choose two.)
A. config advanced 802.11a coverage data fail-percentage 25
B. config advanced 802.11b optimized-roaming enable
C. config advanced 802.11b coverage data rssi-threshold -72
D. config advanced 802.11a optimized-roaming enable
E. config advanced 802.11a coverage data rssi-threshold -72
Correct Answer: AD

An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task?
A. Change the AVC application WebEx-app-sharing to mark
B. Create an ACL for WebEx.
C. Change the WLAN reserved bandwidth for WebEx.
D. Create an AVC profile for WebEx marked with a lower DSCP value
Correct Answer: A

Which statement about when you configure FlexConnect APs and you want to set up Cisco Centralized Key Management fast roaming is true?
A. FlexConnect groups are required for Cisco Centralized Key Management fast roaming to work with FlexConnect access points.
B. APs that are in the same FlexConnect group but associated to different WLCs support Cisco Centralized Key Management.
C. Cisco Centralized Key Management fast roaming among FlexConnect and non-FlexConnect access points is supported.
D. The FlexConnect access point must be in standalone mode to support Cisco Centralized Key Management.
Correct Answer: A

A network engineer observes a spike in controller CPU overhead and overall network utilization after enabling multicast on a controller with 500 APs. What feature is necessary to correct the issue?
A. controller IGMP snooping
B. unicast AP Multicast Mode
C. broadcast forwarding
D. multicast AP Multicast Mode
Correct Answer: B

When a Vocera badge performs a broadcast call in a properly configured VoWLAN using WLC v7.0 which two choices indicate how the QoS is marked? (Choose two.)
A. Upstream marked as Best Effort.
B. Upstream marked as ToS CS4.
C. Upstream marked as DSCP EF
D. Downstream marked as DSCP EF
E. Downstream marked as Best Effort.
F. Downstream marked as Silver.
Correct Answer: CE

An engineer would like to capture NetFlowdata on PI. Which resource is required to allow this?
A. Cisco MSE as NetFlow exporter
B. Prime Infrastructure 1.0 or later
C. Cisco NAC as NetFlow exporter
D. Cisco ISE as NetFlow exporter
Correct Answer: B

What is the best practice for setting the WLC v7.0 use of WLAN QoS settings to support SIP phones on a VoWLAN?
A. Configure SIP with static CAC only with SIP call snooping.
B. Configure SIP with static CAC only without SIP call snooping.
C. Configure SIP with load-based CAC only with SIP call snooping.
D. Configure SIP with load-based CAC only without SIP call snooping.
E. Configure SIP with load-based CAC and TSPEC only with SIP call snooping.
Correct Answer: A

A downstream packet containing a DSCP value arrives at the WLC Ethernet interface from the wired source network. The WLC is configured for QoS WLAN 802.1p mapping. How does the WLC treat the CAPWAP QoS marking when leaving the controller interface for the respective AP and final wireless client destination?
A. No outer CAPWAP or inner QoS tagging is applied.
B. No outer CAPWAP QoS tag is applied but the original DSCP is maintained inside CAPWAP.
C. The outer CAPWAP CoS is marked and capped while the inner DSCP maintains the original marking.
D. The outer CAPWAP DHCP is marked and capped without any inner DSCP value.
Correct Answer: C

VoWLAN implementation plans for a current mix of existing Cisco Unified Wireless IP Phones 7920G and 7921G to a final migration of Wireless IP Phones 7925G in a single WLAN. What would be the most appropriate WLC WLAN configuration to end with Wireless IP Phones 7925G?
A. 7920 Client CAC = enabled only; Radio Policy = All; WMM = Disabled
B. 7920 AP CAC = enabled only; Radio Policy = All; WMM = Allowed
C. 7920 Client CAC = enabled only; Radio Policy = 802.11a only; WMM = Disabled
D. 7920 AP CAC = enabled only; Radio Policy = 802.11a only; WMM = Allowed
E. 7920 Client CAC = enabled only; Radio Policy = 802.11b/g only; WMM = Disabled
F. 7920 AP CAC = enabled only; Radio Policy = 802.11b/g only; WMM = Allowed
Correct Answer: B

You are deploying a combination of Cisco Unified Wireless IP Phones 7921G and 7925G at your branch offices in a centralized call processing environment that requires high availability at branch locations. 300-365 dumps Which three components need to be verified before the wireless IP phones can be deployed? (Choose three.)
A. Sufficient SRST license support at each branch location
B. Support for local voice mail
C. Branch gateways support MoH
D. Properly configured QoS over the IP WAN links
E. Support for single number reach
F. Support for E.164 dialing
G. Sufficient IP phone licenses in the Cisco Unified Communications Manager cluster
Correct Answer: ADG

You have a VoWLAN configured for platinum QoS WMM and CAC. IP phones for this VoWLAN include the Nokia and Cisco Unified Wireless IP Phones 7920G (pre-v2.0 firmware) 7921G and 7925G. The Wireless IP Phones 7921G and 7925G work properly but the Nokia and the Wireless IP Phones 7920G associate with the WLAN but cannot place calls. What is the issue?
A. The lowest mandatory speed in the WLAN is too high and needs to be reduced.
B. The Cisco Unified Wireless IP Phones 7920G and Nokia IP phones do not support TSPEC
C. EDCA needs to be enabled on the WLAN.
D. HCCA needs to be enabled on the WLAN.
E. The reserved roaming bandwidth setting is set too low.
F. The expedited bandwidth setting needs to be enabled.
Correct Answer: B

Drag the QoS values from the lef and drop them in the correct descending order of priority on the right.
Select and Place:
300-365 dumps
Correct Answer:
300-365 dumps

What Our Customers Are Saying:

300-365 dumps
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass

Why Choose/Select Lead4pass?

High quality IT learning materials offered by the best provider lead4pass. From the following picture, you can see there is a difference between lead4pass and other brands. Other brands started earlier, but the Cisco 300-365 dumps exam questions are not the latest and it is very expensive. Lead4pass provide the cheapest and newest questions with high pass rate, pass Cisco 300-365 exam easily.
300-365 dumps
Latest Cisco CCNP Wireless 300-365 dumps exam practice files and study guides in PDF format free download from lead4pass. High quality Cisco CCNP Wireless https://www.lead4pass.com/300-365.html dumps pdf training resources which are the best for clearing 300-365 exam test, and to get certified by Cisco CCNP Wireless. If you are looking to get CCNP Wireless certification by passing exam 300-365 then you can pass it in one go.

Best Cisco CCNP Wireless 300-365 dumps vce youtube demo: